opensuse
[Arriba] [Todas las Listas]

[opensuse] Puerto multiplier problema

To: opensuse@xxxxxxxxxxxx
Subject: [opensuse] Puerto multiplier problema
From: Bob Williams <linux@xxxxxxxxxxxxxxxxxxxxx>
Date: Tue, 04 Oct 2011 16:42:27 +0100
Delivered-to: opensuse@xxxxxxxxxxxxxxxxxxx
Delivery-date: Tue, 04 Oct 2011 11:42:53 -0400
Envelope-to: traductor@xxxxxxxxxxx
List-archive: <http://lists.opensuse.org/opensuse/>
List-help: <mailto:opensuse+help@opensuse.org>
List-owner: <mailto:opensuse+owner@opensuse.org>
List-post: <mailto:opensuse@opensuse.org>
List-subscribe: <mailto:opensuse+subscribe@opensuse.org>
List-unsubscribe: <mailto:opensuse+unsubscribe@opensuse.org>
Mailing-list: contact opensuse+help@xxxxxxxxxxxx; run by mlmmj
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:7.0) Gecko/20110922 Thunderbird/7.0
Yo recientemente comprado un *Sharkoon *SATA *Quickport *Duo

<*http://www.sharkoon.com/?*q=*en/Contenido/*sata-*quickport-*duo-*v2>,

el cual es sujetado a un *eSATA puerto en un *SiliconImage *SATA tarjeta de REDADA.

He utilizado esta tarjeta en el pasado como un *attachment para *JBOD *SATA paseos, los cuales son entonces reunido a un software *linux REDADA1 variedad, pero ahora justo lo quiero utilizar para conectar el por encima de dispositivo al *mainboard.

El sistema sólo verá uno conduce a la vez. Si pueblo ambas bahías de paseo en el *Sharkoon *Quickport, entonces tampoco el paseo es *mountable.

El *Sharkoon la información dice que dos operación de HDD *via *eSATA es sólo posible cuándo el *eSATA Puerto de apoyos del controlador *Multiplier. El *SiliconImage *website dice que la tarjeta, el cual utiliza su *si3124 chip, Puerto de apoyos *Multiplier funcionalidad.

<*http://Www.siliconimage.com/producto/de productos.*aspx?*id=27>.

Mi *kernel 2.6.37.6-0.7-*desktop tiene el *sata_*sil24 módulo cargó.

Puede cualquiera sugiere una razón por qué no soy capaz a *activate el Puerto *Multiplier función? Soy yo perdiendo algo obvio?

*Bob
--
Usuario de Linux registrado #463880		*FSFE Miembro #1300
*GPG-FP: #Uno6*C1 457*C 6DBA *B13*E 5524 F703 *D12Un FB79 926*B 994*E
*openSUSE 11.4 64-bit, *Kernel 2.6.37.6-0.5-*desktop, *KDE 4.6.5
*Intel Núcleo2 *Quad *Q9400 2.66*GHz, 8DDR de GB RAM, *nVidia *GeForce 9600GT
--
A *unsubscribe, *e-correo: *opensuse+unsubscribe@xxxxxxxxxxxx
Puesto que órdenes adicionales, *e-correo: *opensuse+help@xxxxxxxxxxxx


I recently bought a Sharkoon SATA Quickport Duo

<http://www.sharkoon.com/?q=en/content/sata-quickport-duo-v2>,

which is attached to an eSATA port on a SiliconImage SATA RAID card.

I have used this card in the past as an attachment for JBOD SATA drives, which are then assembled into a software linux RAID1 array, but now I just want to use it to connect the above device to the mainboard.

The system will only see one drive at a time. If I populate both drive bays in the Sharkoon Quickport, then neither drive is mountable.

The Sharkoon information says that two HDD operation via eSATA is only possible when the eSATA controller supports Port Multiplier. The SiliconImage website says that the card, which uses their si3124 chip, supports Port Multiplier functionality.

<http://www.siliconimage.com/products/product.aspx?id=27>.

My kernel 2.6.37.6-0.7-desktop has the sata_sil24 module loaded.

Can anyone suggest a reason why I'm not able to activate the Port Multiplier function? Am I missing something obvious?

Bob
--
Registered Linux User #463880		FSFE Member #1300
GPG-FP: A6C1 457C 6DBA B13E 5524 F703 D12A FB79 926B 994E
openSUSE 11.4 64-bit, Kernel 2.6.37.6-0.5-desktop, KDE 4.6.5
Intel Core2 Quad Q9400 2.66GHz, 8GB DDR RAM, nVidia GeForce 9600GT
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx


<Anterior por Tema] Tema Actual [Siguiente por Tema>
  • [opensuse] Puerto multiplier problema, Bob Williams <=