opensuse
[Arriba] [Todas las Listas]

Re: [opensuse] Opensuse 11.4 en DL380G7 y hpsa kernel módulo complains.

To: Per Jessen <per@xxxxxxxxxxxx>
Subject: Re: [opensuse] Opensuse 11.4 en DL380G7 y hpsa kernel módulo complains.
From: Josef Karliak <karliak@xxxxxxx>
Date: Tue, 10 Apr 2012 09:27:13 +0200
Authentication-results: vbms.DUMMY; dkim=pass (1024-bit key) header.i=@fnhk.cz header.b=GBJSRhuz; dkim-adsp=pass
Authentication-results: antivir2.fnhk.cz; dkim=pass (1024-bit key) header.i=@fnhk.cz header.b=GBJSRhuz; dkim-adsp=pass
Authentication-results: antivir2.fnhk.cz; domainkeys=fail (no signature) header.from=karliak@xxxxxxx
Authentication-results: kostnew.fnhk.cz; domainkeys=fail (no signature) header.from=karliak@xxxxxxx
Cc: opensuse@xxxxxxxxxxxx
Delivered-to: opensuse@xxxxxxxxxxxxxxxxxxx
Delivery-date: Tue, 10 Apr 2012 03:27:33 -0400
Dkim-signature: v=1; a=rsa-sha256; c=simple/simple; d=fnhk.cz; s=mail; t=1334042833; bh=1PBDDVTtgrNlHHeDA5/TCY711ffx0jQDvb3yNE0JTD4=; l=9137; h=Message-ID:Subject:From:To:Cc:Date:In-Reply-To:References: Content-Type:Mime-Version:Sender; z=Message-ID:=20<1334042833.5660.99.camel@xxxxxxxxxxxxx>|Subject:=2 0Re:=20[opensuse]=20Opensuse=2011.4=20on=20DL380G7=20and=20hpsa=20 kernel=20module=0D=0A=20complains.|From:=20Josef=20Karliak=20<karl iak@xxxxxxx>|To:=20Per=20Jessen=20<per@xxxxxxxxxxxx>|Cc:=20opensus e@xxxxxxxxxxxx|Date:=20Tue,=2010=20Apr=202012=2009:27:13=20+0200|I n-Reply-To:=20<jm0l9e$bg2$1@xxxxxxxxxxxxxxxx>|References:=20<13340 39663.5660.94.camel@xxxxxxxxxxxxx>=0D=0A=09=20<jm0l9e$bg2$1@saturn .local.net>|Content-Type:=20multipart/signed=3B=20micalg=3D"sha1"= 3B=20protocol=3D"application/x-pkcs7-signature"=3B=0D=0A=09boundar y=3D"=3D-7P7oxQfYA9tr/CZj5/VT"|Mime-Version:=201.0; b=GBJSRhuzdD+AXFkLF1jjy/gTdt6KRJtMd3tRF8O1yakdfrFgygJMBsX7rAxW0rG9F dbLO/XnieDKayqFECuxmfPzYaz/HeIo3fO3fytK1w+H8j6ThHJ/80AdN02Iq/fFCuR IDocLZjdsjoXdVTjH0yt+9fwNeyPl83nhFwsdjgs=
Envelope-to: traductor@xxxxxxxxxxx
In-reply-to: <jm0l9e$bg2$1@saturn.local.net>
List-archive: <http://lists.opensuse.org/opensuse/>
List-help: <mailto:opensuse+help@opensuse.org>
List-owner: <mailto:opensuse+owner@opensuse.org>
List-post: <mailto:opensuse@opensuse.org>
List-subscribe: <mailto:opensuse+subscribe@opensuse.org>
List-unsubscribe: <mailto:opensuse+unsubscribe@opensuse.org>
Mailing-list: contact opensuse+help@xxxxxxxxxxxx; run by mlmmj
References: <1334039663.5660.94.camel@chose.fnhk.cz> <jm0l9e$bg2$1@saturn.local.net>
	*Hi,
	*thanks para respuesta.
	Te es familiar sobre aquel *complains ? Es que errores o sólo "*info"
que alguna orden es *unknown a *hpsa variedad ? Si les podría ignorar o no.
 
	Encontré que "*sda" reemplazó "*ccis" de algún *kernel - utilizo *kernel:
Linux *kostnew 2.6.37.6-0.11-*desktop #1 SMP *PREEMPT 2011-12-19 23:39:38
+0100 *x86_64 *x86_64 *x86_64 *GNU/Linux

	*Thank tú mucho
	*J.*K.



Por *Jessen *píš*e *v *Út 10. 04. 2012 *v 08:51 +0200:
> Josef *Karliak escribió:
> 
> > Buenos días,
> > en sistema *log he encontrado algún *complains:
> > *Apr 10 08:06:53 *kostnew *kernel: [  649.402046] *hpsa 0000:05:00.0: *cp
> > *ffff880037900000 tiene condición de control: *unknown tipo: Sentido: 0*x5, ASC:
> > 0*x24, *ASCQ: 0*x0, Regresando resultado: 0*x2, *cmd=[1#uno 00 1*c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > *Apr 10 08:06:53 *kostnew *kernel: [  649.420465] *hpsa 0000:05:00.0: *cp
> > *ffff880037900000 tiene condición de control: *unknown tipo: Sentido: 0*x5, ASC:
> > 0*x24, *ASCQ: 0*x0, Regresando resultado: 0*x2, *cmd=[1#uno 00 1*c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > *Apr 10 08:06:53 *kostnew *kernel: [  649.438721] *hpsa 0000:05:00.0: *cp
> > *ffff880037900000 tiene condición de control: *unknown tipo: Sentido: 0*x5, ASC:
> > 0*x24, *ASCQ: 0*x0, Regresando resultado: 0*x2, *cmd=[1#uno 00 1*c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > *Apr 10 08:11:53 *kostnew *kernel: [  949.125037] *hpsa 0000:05:00.0: *cp
> > *ffff880037900000 tiene condición de control: *unknown tipo: Sentido: 0*x5, ASC:
> > 0*x24, *ASCQ: 0*x0, Regresando resultado: 0*x2, *cmd=[1#uno 00 1*c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > *Apr 10 08:11:53 *kostnew *kernel: [  949.138095] *hpsa 0000:05:00.0: *cp
> > *ffff880037900000 tiene condición de control: *unknown tipo: Sentido: 0*x5, ASC:
> > 0*x24, *ASCQ: 0*x0, Regresando resultado: 0*x2, *cmd=[1#uno 00 1*c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > *Apr 10 08:11:53 *kostnew *kernel: [  949.151090] *hpsa 0000:05:00.0: *cp
> > *ffff880037900000 tiene condición de control: *unknown tipo: Sentido: 0*x5, ASC:
> > 0*x24, *ASCQ: 0*x0, Regresando resultado: 0*x2, *cmd=[1#uno 00 1*c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> 
> *hpsa es un módulo de conductor de HP para su *Smartarray controladores. 
> 
> > hay 2*x146GB *sas discos en el espejo, antes de que actualizar por "ti" he
> > sacado un disco (como punto para regresar :) ) y hecho actualiza. no hubo *kernel actualizar, sólo algunos *flash, *mozilla o tan. Pero el
> > *complains empezó . Probado para retomar, poder de (cables de poder sacado
> > también) y tomó otro 146GB *sas disco a una bahía. Soy fuera de ideas.
> > En todo caso - en la web de HP es algunos enlaza a *decode que *complains. Pero no utilizo cinta.
> > También sacar "*hpsa" módulo de /*etc/*sysconfig/*kernel "" - no ayudado...
> 
> Si lo sacaste de *INITRD_MÓDULOS, sólo afectaría el *initrd
> y sólo cuándo es (*re-)construyó.  También, te adivino de hecho quiere *ue
> aquel conductor.
> 
> > Cualesquier sugerencias o chutarme a la derecha manera ?
> 
> apoyo de HP?  O quizás *revert al *cciss módulo?  *Upgrade El *firmware
> en el controlador y los paseos. 
> 
> 
> 
> -- 
> Por *Jessen, *Zürich (8.6°*C)
> 

	Hi,
	thanks for answer.
	Are you familiar about that complains ? Are that errors or only "info"
that some command is unknown to hpsa array ? If I could ignore them or
not. 
	I found that "sda" replaced "ccis" from some kernel - I use kernel:
Linux kostnew 2.6.37.6-0.11-desktop #1 SMP PREEMPT 2011-12-19 23:39:38
+0100 x86_64 x86_64 x86_64 GNU/Linux

	Thank you very much
	J.K.



Per Jessen píše v Út 10. 04. 2012 v 08:51 +0200:
> Josef Karliak wrote:
> 
> > Good morning,
> > in system log I've found some complains:
> > Apr 10 08:06:53 kostnew kernel: [  649.402046] hpsa 0000:05:00.0: cp
> > ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC:
> > 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > Apr 10 08:06:53 kostnew kernel: [  649.420465] hpsa 0000:05:00.0: cp
> > ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC:
> > 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > Apr 10 08:06:53 kostnew kernel: [  649.438721] hpsa 0000:05:00.0: cp
> > ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC:
> > 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > Apr 10 08:11:53 kostnew kernel: [  949.125037] hpsa 0000:05:00.0: cp
> > ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC:
> > 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > Apr 10 08:11:53 kostnew kernel: [  949.138095] hpsa 0000:05:00.0: cp
> > ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC:
> > 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> > Apr 10 08:11:53 kostnew kernel: [  949.151090] hpsa 0000:05:00.0: cp
> > ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC:
> > 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00
> > 00 00 00 00 00 00 00 00]
> 
> hpsa is a driver module from HP for their Smartarray controllers. 
> 
> > There are 2x146GB sas disks in the mirror, before update by "you" I've
> > removed one disk (as a point to return :) ) and made update. There
> > were not kernel update, only some flash, mozilla or so. But the
> > complains started . Tried to restart, power off (removed power cables
> > too) and took another 146GB sas disk into a bay. I'm out of ideas.
> > Anyway - on the HP web are some links to decode that complains. But I
> > do not use tape.
> > Also remove "hpsa" module from "/etc/sysconfig/kernel" - not helped...
> 
> If you removed it from INITRD_MODULES, it would only affect the initrd
> and only when it is (re-)built.  Also, I guess you actually want to ue
> that driver.
> 
> > Any suggestions or kick me to the right way ?
> 
> HP support?  Or maybe revert to the cciss module?  Upgrade the firmware
> on the controller and the drives. 
> 
> 
> 
> -- 
> Per Jessen, Zürich (8.6°C)
> 

<<attachment: smime.p7s>>

<Anterior por Tema] Tema Actual [Siguiente por Tema>